Published at Tuesday, August 14th 2018, 21:19:02 PM by Gay Jennings. Air Compressor. Years later, I built a smaller woodworking shop in my home which only required one air sander running at a time. For that shop, I purchased an air compressor half the size and isolated it in a soundproof room in one section of the shop. I ran galvanized pipe under the shop floor to three regulators at three different connection locations. The machine I purchased for that shop as a 5 HP Ingersoll Rand model with an 80 gallon tank. At the 80 PSI required by my Dynabrade sander, the compressor would produce enough air from morning to night. I must say that that compressor was very well built. All I had to do was keep an eye on the oil level in the sight glass. At night, I would turn off the master air valve on the side of the air compressor, leaving the electricity on, to silence the compressor until the next work day.
Published at Monday, August 20th 2018, 14:21:43 PM by Mia Leach. Air Compressor. My familiarity with manufacturing hardwood furniture has taught me that about half the time involved in constructing each chair, table or cabinet is taken up with sanding. When you are trying to make a livelihood in the woodworking industry with hourly employees you must cut inefficiency to a bare minimum. This does not mean becoming a tyrant but, instead, removing any and all impediments that may be slowing construction, sanding and finishing.