By . Air Compressor. At Sunday, September 16th 2018, 08:12:53 AM.
An important factor is also the factor of oil. The oil is used for lubrication of moving parts of the compressor, but it also has some side effects. For example, traces of oil can be found in the tubes that deliver air to your airbrush tool, so it can be mixed with paint. This problem is more pronounced if the compressor is older. One possible solution is to purchase an oil free air compressor.
All reciprocating air compressors throw out some oil with the air they compress. When the tank reaches its designed pressure limit, a switch will interrupt electrical power to the motor. Simultaneously, a certain amount of oily air will be released into the shop environment. You may see oil collecting on the wall behind the compressor and on the pump and compressor as well over time. This is not cause for alarm but periodic cleaning may be needed.
I hope this information has been useful to you. Buying an air compressor for your woodworking shop can be a fairly expensive investment when you consider piping, regulators, hoses, water traps, wiring and electricians. You will want to buy a compressor that is capable of the tasks you will be using it for but no more than that. Purchasing the wrong air compressor can be a very expensive mistake. My motivation in writing this has been to give you the knowledge you will need to select the right one.