By . Air Compressor. At Sunday, September 16th 2018, 05:57:25 AM.
You will need at least one regulator and a water trap in line before the regulator. These are not costly. A regulator allows you to set the correct air pressure for the tool you will be using (say, 80 PSI) instead of tank pressure (say, 175 PSI).
Years later, I built a smaller woodworking shop in my home which only required one air sander running at a time. For that shop, I purchased an air compressor half the size and isolated it in a soundproof room in one section of the shop. I ran galvanized pipe under the shop floor to three regulators at three different connection locations. The machine I purchased for that shop as a 5 HP Ingersoll Rand model with an 80 gallon tank. At the 80 PSI required by my Dynabrade sander, the compressor would produce enough air from morning to night. I must say that that compressor was very well built. All I had to do was keep an eye on the oil level in the sight glass. At night, I would turn off the master air valve on the side of the air compressor, leaving the electricity on, to silence the compressor until the next work day.
I like my life as a portable air compressor. If you own one of us, please treat it kindly. Keep it oiled, adjusted, well maintained, and take care not to set your saw down on its hose. If you do those simple things your compressor will be your friend for a very long time.