By . Air Compressor. At Sunday, September 16th 2018, 12:22:46 PM.
Years later, I built a smaller woodworking shop in my home which only required one air sander running at a time. For that shop, I purchased an air compressor half the size and isolated it in a soundproof room in one section of the shop. I ran galvanized pipe under the shop floor to three regulators at three different connection locations. The machine I purchased for that shop as a 5 HP Ingersoll Rand model with an 80 gallon tank. At the 80 PSI required by my Dynabrade sander, the compressor would produce enough air from morning to night. I must say that that compressor was very well built. All I had to do was keep an eye on the oil level in the sight glass. At night, I would turn off the master air valve on the side of the air compressor, leaving the electricity on, to silence the compressor until the next work day.
Needing to fill up a tire with air, while you’re out and about can be a real challenge. If you’re tired of being stuck with deflated tires on the road, you have probably considered ordering a portable air compressor. One of the problems with these types of compressors is the fact that many of them use a car lighter plug to deliver power to the compressor.
A rotary vane air compressor uses a rotor and a number of blades in radial slots in the rotor. I do not fully understand how this works, but it has something to do with the rotor turning and the blades sliding in and out of their slots as they keep contact with the housing wall. This somehow creates decreasing volume.