By . Air Compressor. At Sunday, September 16th 2018, 10:02:51 AM.
Years later, I built a smaller woodworking shop in my home which only required one air sander running at a time. For that shop, I purchased an air compressor half the size and isolated it in a soundproof room in one section of the shop. I ran galvanized pipe under the shop floor to three regulators at three different connection locations. The machine I purchased for that shop as a 5 HP Ingersoll Rand model with an 80 gallon tank. At the 80 PSI required by my Dynabrade sander, the compressor would produce enough air from morning to night. I must say that that compressor was very well built. All I had to do was keep an eye on the oil level in the sight glass. At night, I would turn off the master air valve on the side of the air compressor, leaving the electricity on, to silence the compressor until the next work day.
I found a nice air powered air gun at a local hardware store. At first it seemed just perfect. I was about to buy it when I noticed on the little description card that it was not recommended to be used with a compressor smaller than 6 gallons. Dang! The portable air compressor I had was only a small 2 gallon pancake compressor. That just wouldn't cut it. I had to buy a larger unit so that I could get the gun, so that I could finish the house project. See how this goes.
An Air compressor pump is indeed indispensable in the highly industrial world where many machines come and change the way production and work is done. Almost all of these machines go through a series of evolution to attend to the changing needs of many industries.