By . Air Compressor. At Sunday, September 16th 2018, 03:53:46 AM.
I hope this information has been useful to you. Buying an air compressor for your woodworking shop can be a fairly expensive investment when you consider piping, regulators, hoses, water traps, wiring and electricians. You will want to buy a compressor that is capable of the tasks you will be using it for but no more than that. Purchasing the wrong air compressor can be a very expensive mistake. My motivation in writing this has been to give you the knowledge you will need to select the right one.
Air output of a compressor is expressed in standard cubic feet per minute (SCFM) or just cubic feet per minute (CFM). Not all 5 HP compressors put out the same volume of air per minute. This is a function not only of motor horsepower but also the efficiency of the air compressor pump the motor is powering. The higher the CFM, the less your air compressor will have to cycle on and off to keep up with the demands you are putting on it. A small compressor pump on a huge tank will produce no more air than on a small tank. The only difference will be in the number of times the compressor cycles on an off each hour and the time it takes to recompress the tank on each cycle. In the final analysis, you need to pay attention to SCFM (or CFM) more than you do motor horsepower or tank size. Air flow is the end product of any compressor and the CFM must be sufficient to the job at hand.
An Air compressor pump is indeed indispensable in the highly industrial world where many machines come and change the way production and work is done. Almost all of these machines go through a series of evolution to attend to the changing needs of many industries.