By . Air Compressor. At Thursday, August 09th 2018, 16:34:12 PM.
Years later, I built a smaller woodworking shop in my home which only required one air sander running at a time. For that shop, I purchased an air compressor half the size and isolated it in a soundproof room in one section of the shop. I ran galvanized pipe under the shop floor to three regulators at three different connection locations. The machine I purchased for that shop as a 5 HP Ingersoll Rand model with an 80 gallon tank. At the 80 PSI required by my Dynabrade sander, the compressor would produce enough air from morning to night. I must say that that compressor was very well built. All I had to do was keep an eye on the oil level in the sight glass. At night, I would turn off the master air valve on the side of the air compressor, leaving the electricity on, to silence the compressor until the next work day.
This kind is suitable for people on the go or who travel. You never have to go through the tedious task of having to find a vehicle big enough to carry your compressor wherever you wanted to go.
Now, most of these you do not have to know anything about, but if you are a layman, you can clearly see that there is a lot more to compressors than first meets the eye. For general use with tools, an air compressor is most likely to be a reciprocating piston, a rotary vane or rotary screw compressor.